A High Profit Business With Lowest Investment. Franchise Without the Royalty

           Get Introduced to a Complete System of Technology

       Create Paving Stone(Giallo Cecilia)s to build roads, parks, floors

This Technology is for investors, architects, designers, construction companies

This new unique technology gives possibilities for the production of Materials(G617) with high physicomechanical indexes. The surface of casting is characterized by high gloss and perfect density. It is worthwhile to note that by imitating, the surface of any artificial or Natural(Light Emprador) material, from the plastic to the complex pattern of malachite, independent of overall sizes and area, it is possible to obtain any color range with different complexity.

All these are possible due to specially developed technology. The essence of this technology is reduced to the fact that air from the concrete mixture, prepared on the special formula, begins to be moved away in the specially modified concrete-mixer and the prepared batch falls on vibration table in an already solid state biased to the high density, free from the air lacunas. The use of a special high-frequency vibration table is necessary only for the uniform distribution of batch over the shaping surface and for even packing of the obtained casting.

In the production topographical- architectural building Materials(G617), we  use new effective flow charts of obtaining specific concretes with the broad band of operating characteristics due to the variation over wide limits of the form of raw material (binding and of fillers), varieties, method and stages of introduction of the chemical modifiers and active mineral additives; Optimization of the composition of multicomponent concrete and goal-directed control of technology. 

Due to the Innovative policy of company, the proposed production has the high physicomechanical characteristics, which combine the high indexes of the strength properties (compressive strength from 40 and above 90, that it corresponds to stamps on the strength OF M'00-MY200 and more) and the rates of hardening (strength at the age of the twenty-four hours of Natural(Light Emprador) hardening is not less than 25-30 MPa) within the required indexes of construction, technical properties, including:

• Waterproof W15 and above.
  
• Frost resistance F350 and above
  
• Wear and tear is not more than 0,2-0,3 g/cm2.
  
• Water absorption of 4.4 mass %.
  
• High resistibility to the penetration of chlorides.
  
• High impermeability to gas.
  
• Adjustable index of deformation (including compensation for the shrinkage of concrete at the age 14-28 days of Natural(Light Emprador) hardening).

What are the advantages of our moulds?

• Longer durability The plastic used for the production of moulds can withstanding more than 300 molding cycles.
  
• they do not need planking
  
• they do not need steaming
  
• they do not require vibration table
  
• they do not need painting
  
• they have both lusterless and glossy surface
  
• thickness of plastic 1.6 mm to 3 mm, can easily restore itself from distortion
  
• Suitable for all technologies of molding,

It occupies very little storing space.

What is needed to start?

Training to operate the system

Purchasing the machine to manufacture the paving Stone(Giallo Cecilia)s

·                     How much investment is required for starting production on your technology?

·                     We have special programs for starting profitable production with minimum investments. For only Usd 6000 you will be able to  begin production.

·                     Does it require some special raw material, for the production of articles based on this technology?

·                     You do not need any special or hard to find Materials(G617) to start production based on our technology, all required products are easily available and are based on inexpensive Materials(G617) found locally.